© 2023 All rights reserved
AEC Supply, Inc.
EnviroGrid® is a geocell for cellular confinement, offered in varying cell sizes and cell depths in order to fill any specific needs. Factors such as soil strength, expected applied loads, and surface type directly affect the appropriate version of EnviroGrid®. For applications with concentrated loads at specific points, such as vehicle-supporting applications, smaller cell sizes are generally desired to ensure proper weight distribution. For erosion control or earth retention, larger cell sizes may be used given various factors such as slope geometry and confinement requirements.
Envirogrid EGA 20 standard sections are manufactured from 58 strips of HDPE, resulting in a section length of 29 cells and 10 cells wide. Each strip is the appropriate width and 142 inches (3.6m) in length. Weld spacing is 14.0 in ± .12 in (355 ± 3mm). Cell density is 35 cells per meter squared. Cell walls are textured and if perforations are required 16% ± 3% of the cell wall is removed.
Polyethylene strip shall be textured with a multitude of rhomboidal (diamond shape) indentations. The rhomboidal indentations shall have a surface density of 22 to 31 per cm² (140 to 200 per in²).
Offered in cell depths of 3″, 4″, 6″ and 8″.
Envirogrid EGA 30 standard sections are manufactured from 58 strips of HDPE, resulting in a section length of 29 cells and 8 cells wide. Each strip is the appropriate width and 142 inches (3.6m) in length. Weld spacing is 17.5 in ± .12 in (466 ± 3mm). Cell density is 22 cells per meter squared. Cell walls are textured and if perforations are required 16% ± 3% of the cell wall is removed.
Polyethylene strip shall be textured with a multitude of rhomboidal (diamond shape) indentations. The rhomboidal indentations shall have a surface density of 22 to 31 per cm² (140 to 200 per in²).
Offered in cell depths of 3″, 4″, 6″ and 8″.
Envirogrid EGA 40 standard sections are manufactured from 58 strips of HDPE, resulting in a section length of 29 cells and 5 cells wide. Each strip is the appropriate width and 142 inches (3.6m) in length. Weld spacing is 28.0 in ± .12 in (711 ± 3mm). Cell density is 9 cells per meter squared. Cell walls are textured and if perforations are required 16% ± 3% of the cell wall is removed.
Polyethylene strip shall be textured with a multitude of rhomboidal (diamond shape) indentations. The rhomboidal indentations shall have a surface density of 22 to 31 per cm² (140 to 200 per in²).
Offered in cell depths of 3″, 4″, 6″ and 8″.
© 2023 All rights reserved
AEC Supply, Inc.